initial commit

print/prusa-default.ini

@@ -0,0 +1,99 @@
+# generated by Slic3r 1.3.0 on 2020-03-19 09:52:15
+adaptive_slicing = 1
+adaptive_slicing_quality = 75%
+avoid_crossing_perimeters = 0
+bottom_infill_pattern = rectilinear
+bottom_solid_layers = 2
+bridge_acceleration = 0
+bridge_flow_ratio = 1
+bridge_speed = 0
+brim_connections_width = 0
+brim_width = 0
+compatible_printers = 
+complete_objects = 1
+default_acceleration = 0
+dont_support_bridges = 1
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 75%
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 18
+extruder_clearance_radius = 15
+extrusion_width = 0
+fill_angle = 45
+fill_density = 30%
+fill_gaps = 1
+fill_pattern = rectilinear
+first_layer_acceleration = 0
+first_layer_extrusion_width = 150%
+first_layer_height = 0.3
+first_layer_speed = 75%
+gap_fill_speed = 0
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 150%
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 0
+infill_speed = 0
+interface_shells = 0
+interior_brim_width = 0
+layer_height = 0.2
+match_horizontal_surfaces = 0
+max_print_speed = 70
+max_volumetric_speed = 16
+min_skirt_length = 3
+notes = 16 mm3/s and 70 mm/s is too much\n- lowered max speed from 70 to 60, volumetric from 16 to 14 + faster top solid from 50% to 75%\n- first layer is now very slow -> increase first layer speed from 50% to 75%\n- back to start, 16mm3/s, 70mm/s max; first layer 75%, top solid 75% -> ok with RDDRONE Top Case
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base]--h[layer_height]f[fill_density].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 35
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+regions_overlap = 0
+resolution = 0
+seam_position = aligned
+shortcuts = complete_objects;fill_density;fill_pattern;adaptive_slicing_quality;layer_height;seam_position;spiral_vase;adaptive_slicing;dont_support_bridges;support_material;raft_layers;support_material_buildplate_only
+skirt_distance = 5
+skirt_height = 1
+skirts = 1
+small_perimeter_speed = 35%
+solid_infill_below_area = 50
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 125%
+solid_infill_speed = 0
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_extruder = 1
+support_material_interface_extrusion_width = 0
+support_material_interface_layers = 0
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_max_layers = 0
+support_material_pattern = rectilinear
+support_material_spacing = 2.5
+support_material_speed = 0
+support_material_threshold = 60%
+thin_walls = 1
+top_infill_extrusion_width = 0
+top_infill_pattern = rectilinear
+top_solid_infill_speed = 75%
+top_solid_layers = 3
+travel_speed = 100
+xy_size_compensation = 0