jannik/settings-Slic3r
1
0
Fork 0
Code Issues Releases Activity

initial commit

Browse source
This commit is contained in:
Jannik Beyerstedt 2020-03-19 11:01:29 +01:00
commit f3b6c9c4ac
9 changed files with 374 additions and 0 deletions
Download patch file Download diff file Expand all files Collapse all files

25
filament/-black-bedOff.ini Normal file
View file

@ -0,0 +1,25 @@
# generated by Slic3r 1.3.0 on 2020-03-19 09:56:03
bed_temperature = 0
bridge_fan_speed = 100
compatible_printers =
cooling = 1
disable_fan_first_layers = 1
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
extrusion_multiplier = 1
fan_always_on = 0
fan_below_layer_time = 30
filament_colour = #000000
filament_cost = 22
filament_density = 1.24
filament_diameter = 2.9
filament_max_volumetric_speed = 0
filament_notes = ""
filament_settings_id =
first_layer_bed_temperature = 0
first_layer_temperature = 205
max_fan_speed = 100
min_fan_speed = 30
min_print_speed = 10
slowdown_below_layer_time = 20
start_filament_gcode = "; Filament gcode\n"
temperature = 203

25
filament/-blue-bedOff.ini Normal file
View file

@ -0,0 +1,25 @@
# generated by Slic3r 1.3.0 on 2020-03-19 09:56:06
bed_temperature = 0
bridge_fan_speed = 100
compatible_printers =
cooling = 1
disable_fan_first_layers = 1
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
extrusion_multiplier = 1
fan_always_on = 0
fan_below_layer_time = 30
filament_colour = #0080FF
filament_cost = 22
filament_density = 1.24
filament_diameter = 3
filament_max_volumetric_speed = 0
filament_notes = ""
filament_settings_id =
first_layer_bed_temperature = 0
first_layer_temperature = 195
max_fan_speed = 100
min_fan_speed = 30
min_print_speed = 10
slowdown_below_layer_time = 20
start_filament_gcode = "; Filament gcode\n"
temperature = 195

25
filament/preset-bedOn.ini Normal file
View file

@ -0,0 +1,25 @@
# generated by Slic3r 1.3.0 on 2020-03-19 09:56:09
bed_temperature = 60
bridge_fan_speed = 100
compatible_printers =
cooling = 1
disable_fan_first_layers = 0
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
extrusion_multiplier = 1
fan_always_on = 0
fan_below_layer_time = 30
filament_colour = #FFFFFF
filament_cost = 0
filament_density = 0
filament_diameter = 3
filament_max_volumetric_speed = 0
filament_notes = ""
filament_settings_id =
first_layer_bed_temperature = 65
first_layer_temperature = 190
max_fan_speed = 100
min_fan_speed = 30
min_print_speed = 10
slowdown_below_layer_time = 10
start_filament_gcode = "; Filament gcode\n"
temperature = 190