Tweaked speed settings

CaliCat had some issues with too much heat

printer/prusa_i3_JB.ini

@@ -1,9 +1,10 @@
-# generated by PrusaSlicer 2.2.0+ on 2020-07-01 at 19:05:32 UTC
+# generated by PrusaSlicer 2.5.2+MacOS-x64 on 2023-04-23 at 10:24:25 UTC
 bed_custom_model = 
 bed_custom_texture = 
 bed_shape = 5x0,195x0,195x190,5x190
 before_layer_gcode = 
 between_objects_gcode = 
+color_change_gcode = M600
 cooling_tube_length = 5
 cooling_tube_retraction = 91.5
 default_filament_profile = ""
@@ -18,9 +19,11 @@ high_current_on_filament_swap = 0
 host_type = octoprint
 inherits = 
 layer_gcode = G4 P500; wait 500ms, trigger octolapse
+machine_limits_usage = emit_to_gcode
 machine_max_acceleration_e = 10000,5000
 machine_max_acceleration_extruding = 1500,1250
 machine_max_acceleration_retracting = 1500,1250
+machine_max_acceleration_travel = 1500,1250
 machine_max_acceleration_x = 9000,1000
 machine_max_acceleration_y = 9000,1000
 machine_max_acceleration_z = 500,200
@@ -39,10 +42,11 @@ max_print_height = 180
 min_layer_height = 0.2
 nozzle_diameter = 0.4
 parking_pos_retraction = 92
-print_host = octoprusa.fra80
+pause_print_gcode = M601
+print_host = 
 printer_model = 
 printer_notes = 
-printer_settings_id = 
+printer_settings_id = prusa_i3_JB
 printer_technology = FFF
 printer_variant = 
 printer_vendor = 
@@ -60,12 +64,12 @@ retract_lift_below = 0
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
 retract_speed = 7
-serial_port = 
-serial_speed = 250000
 silent_mode = 0
 single_extruder_multi_material = 0
 start_gcode = G92 O ; pseudo gcode for octolapse homing\nG1 F2000 X50 Y100 Z5; start pos\n
+template_custom_gcode = 
 thumbnails = 
+thumbnails_format = PNG
 toolchange_gcode = 
 use_firmware_retraction = 0
 use_relative_e_distances = 0