jannik/settings-PrusaSlicer
1
0
Fork 0
Code Issues Pull requests Releases Activity

Tweaked speed settings

Browse source 
CaliCat had some issues with too much heat
This commit is contained in:
Jannik Beyerstedt 2023-04-24 22:41:36 +02:00
parent 0da4860917
commit c523697bf2
6 changed files with 186 additions and 50 deletions
Download patch file Download diff file Expand all files Collapse all files

8
filament/DasFilament-PLA-black-3.00.ini
View file

@ -1,4 +1,4 @@
# generated by PrusaSlicer 2.2.0+ on 2020-07-01 at 19:05:23 UTC
# generated by PrusaSlicer 2.5.2+MacOS-x64 on 2023-04-24 at 18:09:44 UTC
bed_temperature = 0
bridge_fan_speed = 100
compatible_printers =
@ -10,7 +10,7 @@ disable_fan_first_layers = 3
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
extrusion_multiplier = 1
fan_always_on = 0
fan_below_layer_time = 30
fan_below_layer_time = 60
filament_colour = #000000
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
@ -37,6 +37,7 @@ filament_retract_restart_extra = nil
filament_retract_speed = nil
filament_settings_id = ""
filament_soluble = 0
filament_spool_weight = 0
filament_toolchange_delay = 0
filament_type = PLA
filament_unload_time = 0
@ -46,10 +47,11 @@ filament_vendor = (Unknown)
filament_wipe = nil
first_layer_bed_temperature = 0
first_layer_temperature = 205
full_fan_speed_layer = 0
inherits =
max_fan_speed = 100
min_fan_speed = 30
min_print_speed = 10
slowdown_below_layer_time = 10
slowdown_below_layer_time = 15
start_filament_gcode = "; Filament gcode\n"
temperature = 200

10
filament/DasFilament-PLA-red-3.00.ini
View file

@ -1,4 +1,4 @@
# generated by PrusaSlicer 2.2.0+ on 2020-07-01 at 19:05:20 UTC
# generated by PrusaSlicer 2.5.2+MacOS-x64 on 2023-04-24 at 18:09:41 UTC
bed_temperature = 0
bridge_fan_speed = 100
compatible_printers =
@ -10,7 +10,7 @@ disable_fan_first_layers = 3
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
extrusion_multiplier = 1
fan_always_on = 0
fan_below_layer_time = 30
fan_below_layer_time = 60
filament_colour = #FB0207
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
@ -35,8 +35,9 @@ filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_speed = nil
filament_settings_id = ""
filament_settings_id = DasFilament-PLA-red-3.00
filament_soluble = 0
filament_spool_weight = 0
filament_toolchange_delay = 0
filament_type = PLA
filament_unload_time = 0
@ -46,10 +47,11 @@ filament_vendor = (Unknown)
filament_wipe = nil
first_layer_bed_temperature = 0
first_layer_temperature = 205
full_fan_speed_layer = 0
inherits =
max_fan_speed = 100
min_fan_speed = 30
min_print_speed = 10
slowdown_below_layer_time = 10
slowdown_below_layer_time = 15
start_filament_gcode = "; Filament gcode\n"
temperature = 200