jannik/my-prusai3-settings
Archived
1
0
Fork 0
Code Issues Releases Activity

tested slic3r settings for 0.3mm layer height

Browse source
This commit is contained in:
Jannik Beyerstedt 2015-09-14 17:09:19 +02:00
parent e99c7ddc7e
commit ef8d10ff35
5 changed files with 24 additions and 24 deletions
Download patch file Download diff file Expand all files Collapse all files

6
Slic3r-Settings/printer/-prusa-powerOff.ini
View file

@ -1,7 +1,7 @@
# generated by Slic3r 1.2.9 on Sun Sep 13 21:43:09 2015
# generated by Slic3r 1.2.9 on Mon Sep 14 11:36:06 2015
bed_shape = 7x10,187x10,187x190,7x190
before_layer_gcode =
end_gcode = G91 ; relative positioning\nG0 Z20 ; rise Z axis\nG90 ; turn absolute positioning back on\nG1 F3000 X190 Y195\n\nM104 S0 ; turn off temperature\nM84 ; disable motors\nM81 ; Power Supply off
end_gcode = G91 ;rel Pos\nG0 Z20\nG90 ;abs Pos\nG1 F3000 X190 Y195\n\nM104 S0 ;temp off\nM84 ;motors off\nM81 ;Power off
extruder_offset = 0x0
gcode_flavor = reprap
layer_gcode =
@ -17,7 +17,7 @@ retract_lift = 0
retract_restart_extra = 0.1
retract_restart_extra_toolchange = 0
retract_speed = 7
start_gcode = G1 F2000 X50 Y100 Z5 ; lift nozzle
start_gcode = G1 F2000 X50 Y100 Z5; start pos
toolchange_gcode =
use_firmware_retraction = 0
use_relative_e_distances = 0

8
Slic3r-Settings/printer/-prusa.ini
View file

@ -1,7 +1,7 @@
# generated by Slic3r 1.2.9 on Sun Sep 13 22:24:18 2015
# generated by Slic3r 1.2.9 on Mon Sep 14 12:05:49 2015
bed_shape = 7x10,187x10,187x190,7x190
before_layer_gcode =
end_gcode = G91 ; relative positioning\nG0 Z20 ; rise Z axis\nG90 ; turn absolute positioning back on\nG1 F3000 X190 Y195
end_gcode = G91 ;rel Pos\nG0 Z20\nG90 ;abs Pos\nG1 F3000 X190 Y195\n\nM104 S145 ;temp lower
extruder_offset = 0x0
gcode_flavor = reprap
layer_gcode =
@ -14,10 +14,10 @@ retract_layer_change = 1
retract_length = 1
retract_length_toolchange = 10
retract_lift = 0
retract_restart_extra = 0.1
retract_restart_extra = 0.05
retract_restart_extra_toolchange = 0
retract_speed = 7
start_gcode = G1 F2000 X50 Y100 Z5 ; lift nozzle
start_gcode = G1 F2000 X50 Y100 Z5; start pos
toolchange_gcode =
use_firmware_retraction = 0
use_relative_e_distances = 0