jannik/my-prusai3-settings
Archived
1
0
Fork 0
Code Issues Releases Activity

slic3r: new settings with v1.3 beta - more speed

Browse source
This commit is contained in:
Jannik Beyerstedt 2018-10-20 20:42:15 +02:00
parent 37f2f38707
commit b0af0679ed
7 changed files with 162 additions and 58 deletions
Download patch file Download diff file Expand all files Collapse all files

10
Slic3r-Settings/printer/-prusa-powerOff.ini → Slic3r-Settings/printer/-prusa-powerOff-extra.ini
View file

@ -1,20 +1,20 @@
# generated by Slic3r 1.2.9 on Mon Sep 14 11:36:06 2015
# generated by Slic3r 1.2.9 on Sun Oct 7 13:15:59 2018
bed_shape = 7x10,187x10,187x190,7x190
before_layer_gcode =
end_gcode = G91 ;rel Pos\nG0 Z20\nG90 ;abs Pos\nG1 F3000 X190 Y195\n\nM104 S0 ;temp off\nM84 ;motors off\nM81 ;Power off
end_gcode = G91 ;rel Pos\nG0 Z20\nG90 ;abs Pos\nG1 F3000 X190 Y190\n\nM104 S0 ;temp off\nM84 ;motors off\nM81 ;Power off
extruder_offset = 0x0
gcode_flavor = reprap
layer_gcode =
nozzle_diameter = 0.4
octoprint_apikey =
octoprint_host =
octoprint_host = octoprusa.iot-fra80
pressure_advance = 0
retract_before_travel = 2
retract_before_travel = 1
retract_layer_change = 1
retract_length = 1
retract_length_toolchange = 10
retract_lift = 0
retract_restart_extra = 0.1
retract_restart_extra = 0.05
retract_restart_extra_toolchange = 0
retract_speed = 7
start_gcode = G1 F2000 X50 Y100 Z5; start pos

20
Slic3r-Settings/printer/-prusa.ini
View file

@ -1,27 +1,41 @@
# generated by Slic3r 1.2.9 on Sun Jun 5 14:05:39 2016
# generated by Slic3r 1.3.1-dev on 2018-10-07 12:29:57
bed_shape = 5x0,195x0,195x190,5x190
before_layer_gcode =
between_objects_gcode =
end_gcode = G91 ;rel Pos\nG0 Z20\nG90 ;abs Pos\nG1 F3000 X190 Y190\n\nM104 S145 ;temp lower
extruder_offset = 0x0
gcode_flavor = reprap
has_heatbed = 1
host_type = octoprint
layer_gcode =
max_layer_height = 0.4
min_layer_height = 0.2
nozzle_diameter = 0.4
octoprint_host = octoprusa.iot-fra80
octoprint_apikey =
octoprint_host =
pressure_advance = 0
printer_notes =
printer_settings_id =
retract_before_travel = 1
retract_layer_change = 1
retract_length = 1
retract_length_toolchange = 10
retract_lift = 0
retract_restart_extra = 0.05
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 7
serial_port =
serial_speed = 250000
start_gcode = G1 F2000 X50 Y100 Z5; start pos
toolchange_gcode =
use_firmware_retraction = 0
use_relative_e_distances = 0
use_set_and_wait_bed = 0
use_set_and_wait_extruder = 0
use_volumetric_e = 0
vibration_limit = 0
wipe = 0
z_offset = 0
z_steps_per_mm = 0