slic3r: tweaked speeds, timelapse layer change g-code

Slic3r-Settings/filament/-black-bedOff.ini

@@ -1,4 +1,4 @@
-# generated by Slic3r 1.3.1-dev on 2018-10-21 15:52:33
+# generated by Slic3r 1.3.1-dev on 2019-06-06 12:45:34
 bed_temperature = 0
 bridge_fan_speed = 100
 compatible_printers = 
@@ -16,10 +16,10 @@ filament_max_volumetric_speed = 0
 filament_notes = ""
 filament_settings_id = 
 first_layer_bed_temperature = 0
-first_layer_temperature = 200
+first_layer_temperature = 205
 max_fan_speed = 100
 min_fan_speed = 30
 min_print_speed = 10
 slowdown_below_layer_time = 20
 start_filament_gcode = "; Filament gcode\n"
-temperature = 200
+temperature = 203

Slic3r-Settings/print/prusa-default.ini

@@ -1,4 +1,4 @@
-# generated by Slic3r 1.3.1-dev on 2018-11-30 11:52:57
+# generated by Slic3r 1.3.1-dev on 2019-06-06 15:38:07
 adaptive_slicing = 0
 adaptive_slicing_quality = 75%
 avoid_crossing_perimeters = 0
@@ -21,13 +21,13 @@ extruder_clearance_height = 18
 extruder_clearance_radius = 15
 extrusion_width = 0
 fill_angle = 45
-fill_density = 15%
+fill_density = 30%
 fill_gaps = 1
 fill_pattern = rectilinear
 first_layer_acceleration = 0
 first_layer_extrusion_width = 150%
 first_layer_height = 0.3
-first_layer_speed = 50%
+first_layer_speed = 75%
 gap_fill_speed = 0
 gcode_comments = 0
 infill_acceleration = 0
@@ -48,7 +48,7 @@ max_volumetric_speed = 16
 min_shell_thickness = 0
 min_skirt_length = 3
 min_top_bottom_shell_thickness = 0
-notes = 
+notes = 16 mm3/s and 70 mm/s is too much\n- lowered max speed from 70 to 60, volumetric from 16 to 14 + faster top solid from 50% to 75%\n- first layer is now very slow -> increase first layer speed from 50% to 75%\n- back to start, 16mm3/s, 70mm/s max; first layer 75%, top solid 75% -> ok with RDDRONE Top Case
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = [input_filename_base]--h[layer_height]f[fill_density].gcode
@@ -98,7 +98,7 @@ support_material_threshold = 60%
 thin_walls = 1
 top_infill_extrusion_width = 0
 top_infill_pattern = rectilinear
-top_solid_infill_speed = 50%
+top_solid_infill_speed = 75%
 top_solid_layers = 3
 travel_speed = 100
 xy_size_compensation = 0

Slic3r-Settings/printer/-prusa-timelapse.ini

@@ -0,0 +1,41 @@
+# generated by Slic3r 1.3.1-dev on 2020-03-18 08:57:51
+bed_shape = 5x0,195x0,195x190,5x190
+before_layer_gcode = 
+between_objects_gcode = 
+end_gcode = G91 ;rel Pos\nG0 Z20\nG90 ;abs Pos\nG1 F3000 X190 Y190\n\nM104 S145 ;temp lower
+extruder_offset = 0x0
+gcode_flavor = reprap
+has_heatbed = 1
+host_type = octoprint
+layer_gcode = G1 X30 Y5 F5500\nG4 S0\nG4 P500\n;[layer_z]
+max_layer_height = 0.4
+min_layer_height = 0.2
+nozzle_diameter = 0.4
+octoprint_apikey = 
+pressure_advance = 0
+print_host = octoprusa.iot-fra80
+printer_notes = 
+printer_settings_id = 
+retract_before_travel = 2
+retract_layer_change = 1
+retract_length = 1
+retract_length_toolchange = 10
+retract_lift = 0
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 7
+serial_port = 
+serial_speed = 250000
+start_gcode = G1 F2000 X50 Y100 Z5; start pos
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 0
+use_set_and_wait_bed = 0
+use_set_and_wait_extruder = 0
+use_volumetric_e = 0
+vibration_limit = 0
+wipe = 0
+z_offset = 0
+z_steps_per_mm = 0

Slic3r-Settings/printer/-prusa.ini

@@ -1,4 +1,4 @@
-# generated by Slic3r 1.3.1-dev on 2018-10-07 12:29:57
+# generated by Slic3r 1.3.1-dev on 2019-06-06 13:38:06
 bed_shape = 5x0,195x0,195x190,5x190
 before_layer_gcode = 
 between_objects_gcode = 
@@ -11,9 +11,9 @@ layer_gcode =
 max_layer_height = 0.4
 min_layer_height = 0.2
 nozzle_diameter = 0.4
-octoprint_host = octoprusa.iot-fra80
 octoprint_apikey = 
 pressure_advance = 0
+print_host = octoprusa.iot-fra80
 printer_notes = 
 printer_settings_id = 
 retract_before_travel = 2